what's tapered rollers with small end and large face? where's of loose tapered rolling elements manufacture? how to buy precision tapered rollers and tapered roller bearings?
Font: normal mid large Print Close Bookmark

YDTech® manufacturer of precision tapered rollers and tapered roller bearings! Supplier of loose tapered rolling elements in china.

tapered rollers as an rolling elements for tapered roller bearing. bearings consist of components: inner/outer ring; the cup; the tapered rollers; and the cage.

tapered roller gauge value in the same batch, with a maximum average diameter of a single plane with the smallest average diameter of a single plane, the difference between its average diameter of a single plane.

SDw : basis of the end surface of a roller from the roller at 1.2 times the maximum chamfer dimensions, and the center line of the circumference of the roller axis, each pitch on this circumference of a radial axial plane of maximum and minimum distance poor.

tapered rollers radius of basis end faces

SR: in either inside a roller axial plane, roller cone surface intersection of the two Plain line extension line is center of the sphere to the distance between the intersection and reverie corners to make a spherical radius, spherical roller benchmark is part of the end face , the radius of the sphere is the basis of the end face of the radius, also known as ball base radius.

regulation values of tapered rollers

In the middle of the length of the roller radial plane, the average diameter of the roller single plane deviates from the nominal diameter, the diameter of The lower deviation defined deviation range.

tapered rollers nest hole diameter rollers allow the range of 40% to 55% of the diameter, the other dimensions required by the provisions of Table 6, the cavity clean and free of debris, regular shape, no obvious defects.

tolerance and grade of tapered rollers (tapered bearing rollers)

loose tapered rollers, precision tapered roller bearing
grade Dw/mm geometric tolerance cone angle deviation change value of batch sizes
exceedtoVDwpmax△CirmaxSDwmax△2φ upper deviation△2φlower deviation VDwLmaxVmax
G0-100.30.31.0+0.6-0.61.00.6
10180.30.31.0+0.7-0.71.00.7
18300.40.42.0+0.7-0.71.00.7
G1-100.50.52.0+1.0-1.01.01.0
10180.50.52.5+1.0-1.01.51.0
18300.80.83.0+1.5-1.52.01.5
G2-101.21.23.0+2.0-2.02.02.0
10181.21.24.0+2.0-2.02.52.0
18301.51.55.0+2.5-2.53.02.5
30502.02.06.0+3.0-3.03.03.0
G3-102.02.05.0+2.0-2.03.03.0
10182.02.06.5+3.0-3.03.03.0
18303.03.08.5+4.0-4.05.05.0
30503.03.010.0+5.0-5.05.05.0
50804.04.012.0+5.0-5.05.05.0
loose tapered rollers, tapered roller bearing, tapered rolling elements, precision tapered rollers, roller bearings.

surface roughness of tapered rollers

loose tapered rollers, precision tapered roller bearing
grade rolling surface (Ramax) basis of end face (Ramax) other, chamfer (Ramax)
G00.040.101.25
G10.080.1251.25
G20.1250.162.5
G30.16(Dw<=30mm)0.322.5
G30.25(Dw>30mm)0.322.5
loose tapered rollers, tapered roller bearing, tapered rolling elements, precision tapered rollers, roller bearings.

ball base surface of tapered rollers

loose tapered rollers, precision tapered roller bearing
base grade SR(mm) surface roughness △SR
from to max upper deviation lower deviation
SR12-2000.120-5
2004000-5
SR16-2000.160-10
2004000-15
SR32-2000.320-15
2004000-30
SR40-2000.400-15
2004000-40
loose tapered rollers, tapered roller bearing, tapered rolling elements, precision tapered rollers

straightness of tapered rollers

loose tapered rollers, precision tapered roller bearing
Dw straightness
exceedtoG0G1
-30mm+0.5um+1um
30mm50mm-+2um
loose tapered rollers, tapered roller bearing, tapered rolling elements, precision tapered rollers,

V-block measurement for roundness of tapered rollers

loose tapered rollers, precision tapered roller bearing
angle wave numbers
3579111315171921
60°C3--3--3--3
90°C22--22--22
120°C1221--1221
loose tapered rollers, tapered roller bearing, tapered rolling elements, precision tapered rollers,
crossed bearing rollers needle rollers tapered rollers cylindrical rollers dowel pins roller rings copyright©2017 YDTech®